BowTech Destroyer



Bowhunting.net

BowTech Archery

BowTech Destroyer

By

Jan 6, 2010 – 9:50:30 PM

 

BOWTECH DESTROYER

The Destroyer 350 was not designed as a speed bow. It was designed
to be accurate, shock-free and easy to draw. It just happens to be fast
— very fast. This incredible balance is accomplished using three new
technologies: HardCore Limbs™, OverDrive Binary™ and FLX-Guard™. While
most archers are forced to trade shootability for speed, the Destroyer
legitimately delivers both and retains the “dead in the hand” shooting
characteristic that BowTech is known for.

Brace Height 6″
IBO Speed 342 – 350 fps
Axle to Axle 32 3/8″
Kinetic Energy 95.22 fpe
Draw Length 25 – 30″
Effective Let-Off 80%
Draw Weight 50, 60, 70

OverDrive Binary™    more info »

OverDrive Binary

Truly
the ultimate cam technology ever developed, BowTech’s new OverDrive
Binary™ synchronized dual cam system delivers 350 feet per second while
raising the bar on the overall shooting experience. By attaching a 100%
tunable split buss cable harness to the ends of a cam synchronizing
axle, cam stability is maximized while maintaining perfect
synchronization for unmatched accuracy and a very comfortable draw
cycle. Premium alloy composition allows for a strong, lightweight
design which diminishes noise and vibration. The OverDrive Binary comes
standard with rotating modules.

HardCore Limbs™    more info »

HardCore Limbs

Laminated
high modulus carbon core limbs underscore BowTech’s focus on limb
quality. On typical limbs, most of the bow’s energy is stored near the
outside of the limb, while the core stores minimal energy and serves as
little more than a spacer. HardCore Limbs™ put the core to work,
storing energy not only near the surfaces, but inside the limb. By
sharing the workload, stress is reduced, producing exceptional
durability. The carbon core is also significantly lighter than other
limb materials available today, which produces a tighter physical
response for increased energy efficiency, less noise and less vibration.

FLX-Guard™    more info »

FLX-Guard

The
new FLX-Guard™ cable containment system addresses the tuning effects of
extreme cable tension and inflexible cable guards found on today’s
bows. As the bow is drawn, the FLX-Guard™ responds by flexing inward,
absorbing much of the cable guard torque that would have otherwise been
transferred to the riser. The result is substantial reduction in
lateral nock travel, yielding a real advancement in tune-ability,
forgiveness and accuracy.

Rotating Mod System   more info »

Rotating Mod System

Unlike
most bows on the market today, BowTech bows do not require a new cam or
module to set your draw length. Simply remove the module screws, rotate
the module, and re-tighten. At least six inches of draw length
adjustment and an infinite draw stop feature is available on most
BowTech bows, allowing for custom draw length tuning for yourself or
others.

Carbon Rod String Stop   more info »

Carbon Rod String Stop

BowTech
string stops are made of carbon which is one of the strongest
vibration-dampening materials found on the planet. It is positioned
directly in line with the stabilizer to effectively transfer vibration
from the string to the stabilizer. This optimizes bow balance and
dissipates noise and vibration efficiently.

BowTech Factory Strings    more info »

BowTech
is widely regarded for the best factory strings “out of the box”. The
secret is literally in the hands. BowTech strings are handmade in the
USA to machine-grade tolerances. The string has exactly the same amount
of twist across its entire length. Each individual string is precisely
wound to within 1/32″ difference in length and subjected to 450 pounds
of tension for 3 times longer than necessary to eliminate creep. No
other manufacturer matches this process today. The result is no string
separation, no peep rotation and absolute stability with proper dealer
setup.

Finish Options    more info »

Destroyer
bows are available in Realtree Hardwoods HD® and BlackOps™. Or, choose
an alternate finish. Risers come in APG HD®, Mossy Oak® Infinity™,
Optifade™ Open Country or Forest and Next FLX™. Any alternate finish
will have black limbs.

 

© Copyright 2005 by
Bowhunting.net