In 2009, the IceMan beat out all leading competitors while taking the
Outdoor Life Editor’s Choice Award. Now with the all new 2010
IceMan FLX, we’ve added another industry first to the market: the
FLX-Guard™. The FLX-Guard™ cable containment system addresses the
tuning effects of high cable tension on today's premium bows. Draw your
bow and the FLX-Guard™ flexes inward to absorb cable guard torque that
normally transfers to the riser. The IceManFLX still features deadly
quiet, vibration-damping Center Pivot Technology™. The forged aluminum,
single piece riser, ultra-rugged laminated limbs, and Zero Tolerance
Assembly all combine to create a bow of singular quality and
extraordinary reliability.
The
new FLX-Guard™ cable containment system addresses the tuning effects of
extreme cable tension and inflexible cable guards found on today's
bows. As the bow is drawn, the FLX-Guard™ responds by flexing inward,
absorbing much of the cable guard torque that would have otherwise been
transferred to the riser. The result is substantial reduction in
lateral nock travel, yielding a real advancement in tune-ability,
forgiveness and accuracy.
The Center Pivot meets the splits limbs near the center point to create
the shootable, "dead in the hand" experience that the IceMan has become
known for. This 2nd-generation technology combines the riser and center
pivot into a single strong structure that cuts the number of components
in half, thus reducing weight and vibration. The deflexed riser
configuration places the pivot point of the limb behind the throat of
the grip, creating a consistent, accurate shooting experience.
Zero-tolerance assembly guarantees all parts fit.
The IceMan FLX’s string stop is made of carbon which is one of the
strongest vibration-dampening materials found on the planet. It is
positioned directly in line with the stabilizer to effectively transfer
vibration from the string to the stabilizer. This optimizes bow balance
and dissipates noise and vibration efficiently.
Unlike most bows on the market today, Diamond bows do not require a new
cam or module to set your draw length. Simply remove the mod screws,
rotate the module, and re-tighten. At least six inches of draw length
adjustment is available on most models, allowing for custom draw length
tuning for yourself or others.
