Feather Choppers and Burners
are now available through Gateway Feathers.
If you yearn to build your arrow feathers or create your own shape of
feather then the feather Chopper & burner are the tools for you.
The feather Chopper
comes in six different shapes and five different sizes. We also are able
to make custom feather shapes for you also. With a custom shape you send
us a drawing of the shape and size of the feather you would like and we'll
make it for you.
The blade is a special tempered steel and with proper care the blade
should never need sharpening, unless the blade is nicked.
You can cut either left or right wing feathers with these choppers and
adjust the sizes according to chart below.
| Shape |
Order Number |
Size Range |
| Shield |
S-3 |
2.75 to 3 in. |
| Shield |
S-4 |
3.75 to 4 in. |
| Shield |
S-5 |
4.50 to 5 in. |
| Shield |
S-55 |
5.50 in. |
| |
|
|
| Parabolic |
P-3 |
2.75 to 3 in. |
| Parabolic |
P-4 |
3.75 to 4 in. |
| Parabolic |
P-5 |
4.50 to 5 in. |
| |
|
|
| Banana |
High |
5.25 to 5.75 in. |
| Banana |
Low |
1/8" lower profile |
| |
|
|
| Pope & Young |
Traditional |
5.25 in. |
| |
|
|
| The Classic |
Classic |
5.25 in. |
| |
|
|
| Raptor |
R-4 |
4.00 in |
| Raptor |
R-5 |
5.25 in. |
| |
|
|
| Custom |
Custom |
???? |
|
|
|
The feather Burner
is a remake of the ageless classic Young Feather Trimmer. With this feather
trimmer you will be able to make exact duplicate cuts on each arrow by
burning the feather as it sits on the arrow.
The hot wire actually burns the feather into the shape you want. You
pre-cut the size, attach the full feather piece to the arrow and then burn
the shape after all the feathers are attached. This burner comes with a
sample shape to try and 4 extra ribbons to try new shapes.
 |