"We designed this stabilizer especially for our new VIB~X bows," says Roger Templeton, Pearson's chief of research and engineering, "and then discovered that it worked equally well for all bows!"
 

The new Pearson Stomper Stabilizer was designed especially to assist with damping any stray noise and vibration on bows like the Diamondback VX or the McPherson Pro Shop 38" Special which incorporate the remarkable new VIB~X noise and vibration elimination technology in the bow riser.

The unique VIB~X Bow Riser System was conceived to virtually eliminate noise and vibration following a shot. "With fast, reliable hunting bows like our Diamondback VX or the McPherson Pro Shop Hornet or Penetrator VX, we want archers to have optimum shooting performance," Roger says. "This means short bows, fast arrows; an absolute minimum of noise after the shot; and little or no recoil that your body needs to absorb."

The Stomper Stabilizer is 3" long and weighs 6 oz. It is 1 ½" in diameter. Pearson designed the Stomper with an exclusive isolating rod molded into a remarkable and patented visco-elastic polymer gel, VibaSorb from Ron Gilley's Vibracheck, that effectively eliminates any friction from metal-to-metal contact and to allow the rod to dissipate any left-over stray energy in a 360o geometric pattern. Elastic neoprene resonance reduction collars, a Vibracheck trademark, are wrapped around the machined 6061-T6 aluminum housing to dampen any resonant vibration on the machined surface of the Stomper Stabilizer.

For further information on this or any other Pearson Archery product contact:

Pearson Archery
P.O. Box 327
Brewton, AL  36427

Telephone (251) 867-8475 
Fax (251) 867-9005 
Email: http://www.benpearson.com/contact.asp
www.benpearson.com
 

Telephone (251) 867-8475 
Fax (251) 867-9005 
www.benpearson.com